Tape measure is a soft measuring tool made of plastic, steel bar or cloth. It is easy to carry and can also measure the length of some curves. The measuring tape used in the apparel industry is also a tape measure, also known as a soft tape. The materials used are PVC plastic and fiberglass. There are many scales and numbers on the tape measure, so what do you think of the tape measure? Steps to use tape measure Step 1: Prepare a ruler. We notice that the switch button on the ruler is closed. Step 2: Turn on the switch, we can pull the ruler at will, stretch and shrink automatically. The third step: the 0 scale of the ruler is tightly attached to one end of the object, then we keep it parallel to the object, pull the ruler to the other end of the object, and close to this end, and close the switch. Step 4: Keep the sight line and the scale on the ruler vertical, and read the data. record it. Step 5: Turn on the switch, retract the ruler, close the switch, and put it back. What about tape measure 1. Direct reading method During the measurement, the zero scale of the steel tape is aligned with the starting point of the measurement, and an appropriate pulling force is applied, and the scale on the ruler corresponding to the end point of the measurement is directly read. 2. Indirect reading method In some places where the steel tape measure cannot be used directly, a steel ruler or a square ruler can be used to align the zero scale with the measuring point, and the ruler body is consistent with the measurement direction; use the tape measure to measure the distance of a full scale on the steel ruler or the square , Yu Chang measured by reading method. Tips: The general label of